8079 Alloy Chocolate Packaging Aluminum Foil

Type:Aluminum Foil For heat sealing lids
Application:To be used for food packaging/Cigarette packaging after lamination
Alloy:1235 8011 8079 1200
Temper:O
Thickness:0.0055mm-0.03mm
Width:200mm-1600mm
Surface:One side bright,one side matt.
Packaging:Free Fumigated wooden box.
Inner diameter:76mm/152mm
Roll weight:according to customers machine

Product Details

8079 alloy Chocolate Packaging Aluminum Foil

5

Ordinary soft package or hard package, wrapped cigarette is mainly lined with aluminum foil paper, mainly rolled aluminum foil paper and aluminized paper. This kind of compound aluminum foil paper has high barrier and antiseptic effect on light, air and water, so the function of cigarette case aluminum foil paper is mainly to protect fragrance and mildew. Aluminum foil can prevent the smell of cigarettes, and prevent the smell of cigarettes from eroding other items; The second is to resist moisture, effective moistureproof, so as to avoid cigarettes in the humid environment mildew.

Due to its special physical properties and a series of advantages such as light weight, airtight and good cladding, double zero aluminum foil has better packaging performance than traditional paper and plastic. At present, in addition to electrolytic capacitors basically with double zero aluminum foil, more than 90% of the packaging with aluminum foil using double zero aluminum foil. At present, about 70% of foreign aluminum foil is produced with hot rolled blank, while more than 80% of the aluminum foil produced in China is produced with cast rolled blank.

The vast majority of aluminum foil is made of 99.0% ~ 99.5% industrial pure aluminum processing, among which the most commonly used 1100, 1145, 1235, 1350, 8079 aluminum alloy. The production practice shows that 1235 and 8079 alloy are most suitable for the production of double zero aluminum foil. At present, more than 90% of domestic production of double zero aluminum foil USES 1235 alloy, and Europe and the United States generally use 8079 alloy. The main impurity elements in 1235 industrial pure aluminum are Fe and Si. Fe and Si are mainly added to the melting furnace in the form of alloying element additives for batting.
The content of Si and Fe, Fe/Si ratio and the size of compound phase have great influence on the rolling property of aluminum foil. The solid solution of Fe and Si in aluminum not only increases the hardness of the material, but also improves the deformation resistance and the working hardening rate of the material, which is not conducive to rolling. Moreover, with the gradual decrease of rolling thickness, if the content of Fe and Si in solid solution is higher, the thick second phase formed is more likely to cause pinhole production, and serious even lead to belt break, so as to reduce the content of Fe and Si in solid solution as much as possible, so that Fe and Si can be fully precipitated. The results show that when the Fe/Si ratio is between 2.0 and 3.0, the compound phase of 1235 aluminum alloy is mainly the -AlFESi phase, which is the most conducive to the rolling production of aluminum foil. Therefore, in the configuration of 1235 aluminum alloy components, Fe content should be greater than Si content, Fe/Si ratio control between 2.0 and 3.5, generally take Si content between 0.08% and 0.15% is the most appropriate. In the production of ultra-thin aluminum foil blank, due to its higher performance requirements, its chemical composition control is also more strict. Domestic advanced enterprises that use 1235 alloy to produce 0.0045mm ultra-thin aluminum foil blank Fe and Si components are respectively controlled at 0.3

PACKAGE:

we use the horizontal shipment,multilayer protection+free-fumigated wooden box,it could protect the goods well.also we put a lot of desiccant in the package. After you take out the material, seal the bag tightly so that it won't get wet and oxidized.

hanging packaging



High quality packaging aluminum foil rolls



flexible packging foils

Our service:

1.We have the most convenient transport and prompt delivery.
2.We offer competitive price with best service .
3.We have high technical production line with top quality products.
4.We have win high reputation based on best quality products.

FAQ

A:Are you manufacturer or trade Company?
B:We are a factory founded in 2009 with trade team for international service.


A:What terms of payment you usually use?
B:T/T 30% deposit and 70% against document, L/C at sight


A: Do you accept customized orders?

B:Yes,we do. Your customized orders are always welcomed. please kindly offer us your samples or drawings , so that we can customize the products according to your preferences. about any further detail, please feel free to contact us.


A: What information should I let you know if I want to get a quotation?

B: your detailed requirments regarding the products 's Alloy,Temper, including width, thickness, usage , and your order quantity are highly appreciated if you want further information about our quotation

Hot Tags: 8079 alloy chocolate packaging aluminum foil, China, manufacturers, suppliers, factory, customized, wholesale, price, in stock, made in China

Inquiry

You Might Also Like