1235alloy Capacitor Used Aluminum Foil Roll

Type:Industrial aluminum foil.
Application:Widely used for cable,waterproof,Transformer and so on
Alloy:1060 8011 1235 8079
Temper:O
Thickness:0.0055mm-0.2mm
Width:10mm-1600mm
Surface:One side bright,one side matt or both sides bright.
Packaging:Free Fumigated wooden box.
Inner diameter:76mm/152mm
Roll weight:according to customers machine

Product Details

Industrial Aluminum Foil

foil (2).jpg

Type:Industrial aluminum foil.

Application:Widely used for cable,waterproof,Transformer and so on

Alloy:1060 8011 1235 8079

Temper:O

Thickness:0.0055mm-0.2mm

Width:10mm-1600mm

Surface:One side bright,one side matt or both sides bright.

Packaging:Free Fumigated wooden box.

Inner diameter:76mm/152m

Roll weight:according to customers machine

The aluminum plate is at least 200mm thick and can be used in many applications, such as packaging and electronic equipment.The aluminum plate can be produced in two stages.Aluminium alloy sheet is rolled into oil on rolling mill.Therefore, the quality of aluminum alloy sheet will affect the surface quality of the oil produced.Aluminum alloy plates used in the production of aluminum alloy plates can be produced using the traditional cast-rolling (HR) process.Recently, the double roll casting and rolling (TRC) process has been used extensively in the aluminum processing industry to produce the same products as the traditional hot rolling process.1,2 the fourth process is more energy efficient and can produce products lower than the traditional process.But in the fourth process, the ceramic nozzle used to melt and solidify in the gap between the rotating rollers.The initial thickness of the aluminum sheet is usually lower than normal, but the subsequent control and cooling processIn addition, we need a form of aluminum parts.If aluminum parts produced by RC (including subsequences and cold rolling processes) can be used for foil parts, oil production costs can be reduced.However, because the two rotating rollers and circulating cooling water move together, the aluminum parts produced have the required microstructure characteristics, and the size of the surface is very small in the center of the traditional ingot.The distribution of particles, solutes and precipitates is not uniform in the direction of the ingot.3 -- 7 thus, there are difficulties in the production process, for example, between ingots and ingots, 1,3,8series of aluminium alloys used in the production of aluminium oil, and the high surface equivalent of aluminium oil available in the production of aluminium oil.8,9 however, the matt defect softening current on the aluminum-oil surface is made from the aluminum-oil surface

OUR PACKAGING:

we use the horizontal shipment,multilayer protection+free-fumigated wooden box,it could protect the goods well.

horizontal packaging_815

OUR WORKSHOP:

WORKSHOP_815

workshop2_815

OUR CUSTOMERS AND COOPERATION:

CUSTOMERS_815

Inquiry