0.006mm-0.02mm Aluminum foil Jumbo roll for Lamination
Extrusion compounding is to melt a thermoplastic such as polyethylene, polypropylene, etc. in an extruder, and then extrude the flat die into a sheet-like hot-melt film as a binder, and immediately cool with the aluminum foil and another substrate. The roller and the composite roller are combined. The process is simple, no adhesive is needed, and the trademark and the pattern can be sandwiched in the middle, and has been widely used in the production of aluminum foil composite packaging materials.
The hot-melt composite is obtained by putting together a polyethylene-acrylic acid vinegar copolymer, an ethylene-vinyl acetate copolymer, and a paraffin wax, and coating them on the surface of a substrate, and then immediately cooling the composite with aluminum foil. Compared with dry compounding and wet compounding, it has the advantages of no hot drying drying, short compounding time, energy saving, low cost and no solvent pollution.
The HTMM had been served the globle clients for more than 10 years,
We do relize the difference among the different markets. We are devoting ourself on the technical improvement and market analysis.
Based on the 6 rolling and milling machine, 2 slitting machina and 2 foil folding machina.
The HTMM has confident at the 30000 ton annually out put and punctal delivery.
Please feel free to contact us for any concern of yours. You will have our promot attention.
WEB: www.htmmgroup.com