Important Point Of Electronic Aluminum Foil Cleaning

- Oct 28, 2019-

The importance of electronic aluminum foil cleaning

Electronic aluminum foil belongs to deep processing technology, and the surface quality has a great influence on the electronic storage capacity. The small defects caused by the previous process on the surface of the aluminum foil will be amplified in the subsequent process. Therefore, only the quality of the foil surface is performed in each process in the production process. strict control.

 

Electronic aluminum foil cleaning process

The cleaning process of the aluminum foil is as follows: the strip enters the device from the uncoiler and the inlet deflector roller, first passes through the lower brush roller, and a cleaning liquid is sprayed between the lower brush roller and the strip to wash the lower surface of the strip. Next, the strip passes through the upper roller, and a cleaning liquid is also sprayed between the upper roller and the strip to wash the upper surface of the strip. The strip then enters the rinse tank. Still use the same cleaning solution to spray the upper and lower surfaces of the strip. The cleaning oil on the surface of the strip was squeezed dry through a 2# dry roll. After the strip is taken out of the rinsing tank, it enters the drying box, and the residual cleaning liquid on the strip is evaporated under the hot air. Finally, the strip passes through the exit deflector and is wound up into a roll by the coiler. The cleaning is over.